Fully Automatic Case Sealing

K730HM or K730TH - Fully Auto Top Only Case Sealing

  • RSC or FOL Cases
  • Up to 20 cases/minute
  • Crank Adjust for Height
  • Case Range Min:  7″ L x 7″ W x 9″ H
  • Case Range Max:  24″ L x 18″ W x 24″ H
  • Hot Melt or Tape Head Seal
  • Safety Shields
  • 80PSI Air Pressure with 1/2″ Diameter air Line
  • 240 Volt/3 Phase/60 Hertz
  • Legend Plate Circuit Identification
  • PLC (Programmable Logic Control)
  • Touch Screen
  • Powder Coating and Zinc Plating on All wear Surfaces
  • Training & Setup  (Travel Expenses Additional)
  • Casters with Locking Pads
  • Spare Parts Kit
  • Stainless Steel Construction with Nema 4 Electrical Panel
  • 480 volt Main Power

K70HM or K740TH - Fully Auto Top & Bottom Case Sealing

  • RSC or FOL Cases
  • Up to 25 cases/minute
  • Crank Adjust for Quick Changeover
  • Case Range Min:  7″ L x 7″ W x 9″ H
  • Case Range Max:  24″ L x 18″ W x 24″ H
  • Hot Melt or Tape Head Seal
  • Safety Shields
  • 80PSI Air Pressure with 1/2″ Diameter air Line
  • 240 Volt/3 Phase/60 Hertz
  • Legend Plate Circuit Identification
  • PLC (Programmable Logic Control)
  • Touch Screen
  • Powder Coating and Zinc Plating on All wear Surfaces
  • Heavy Duty Flightbar Case Advance
  • Pneumatic Compression (Hot Melt o- only)
  • Pneumatic Indexer and Rear Minor Flap Tucker
  • Training & Setup  (Travel Expenses Additional)
  • Casters with Locking Pads
  • Spare Parts Kit
  • Stainless Steel Construction with Nema 4 Electrical Panel
  • 480 volt Main Power

K500HM or K500TH - Heavy Duty Top Sealing

  • Up to 30 cases/minute
  • RSC or FOL cases
  • Crank Adjust for Quick Changeover
  • Case Size Min:  10″ L x 6″ W x 6″ H
  • Case Size Max:  22″ L x 17″ W x 18″ H

 

  • Hot Melt or Tape Head Seal
  • Safety Shields with Safety Sensors
  • 80PSI Air Pressure with 1/2″ Diameter air Line
  • 240 Volt/3 Phase/60 Hertz
  • Legend Plate Circuit Identification
  • PLC (Programmable Logic Control)
  • Touch Screen
  • Powder Coating and Zinc Plating on All wear Surfaces
  • Training & Setup  (Travel Expenses Additional)
  • Random Box Sizes
  • Cases Out of Range
  • Side Flange Case Sealing
  • Case By-Pass
  • Spare Parts Kit
  • Corrosion Resistant Construction
  • Stainless Steel Construction with Nema 4 Electrical Panel
  • 480 volt Main Power

K600HM or K600TH - Heavy Duty Top & Bottom Case Sealing

  • Up to 35 cases/minute
  • RSC or FOL cases
  • Crank Adjust for Quick Changeover
  • Case Size Min:  10″ L x 6″ W x 6″ H
  • Case Size Max:  22″ L x 17″ W x 18″ H
  • Hot Melt or Tape Head Seal
  • Safety Shields with Safety Sensors
  • 80PSI Air Pressure with 1/2″ Diameter air Line
  • 240 Volt/3 Phase/60 Hertz
  • Legend Plate Circuit Identification
  • PLC (Programmable Logic Control)
  • Touch Screen
  • Powder Coating and Zinc Plating on All wear Surfaces
  • Training & Setup  (Travel Expenses Additional)
  • Random Box Sizes
  • 2″ Lid Lifting
  • Case By-Pass
  • Cases Out of Range
  • Spare Parts Kit
  • Corrosion Resistant Construction
  • Stainless Steel Construction with Nema 4 Electrical Panel
  • 480 volt Main Power